AV-278 Low Vis Hydro

AV-278 Low Vis Hydro

AV-278 Low Vis Hydro is a moisture activated, MDI-based polyurethane resin whose chemical reaction is catalyzed by mixing AV-279 Low Vis Accel with AV-278. Injected as a single component, AV-278 uses moisture as an initiator and is designed with soil permeation in mind – it has a low viscosity for penetration with high expansion to fill voids, stop active or potential water leaks, and stabilize soils. AV-278 withstands wet/dry cycles and forms a dense, closed-cell, impermeable semi-rigid foam.

AV-279 Low Vis Accel is the catalyst designed exclusively for use with AV-278 Low Vis Hydro. Depending on the desired reaction time, AV-279 may be doubled.

AV-278 Low Vis Hydro is certified for NSF/ANSI/CAN 61 - Drinking Water System Components.

Technical Resources

Additional Resources

Related Products

  • AV-208 Technical Grade Acetone

    AV-208 Technical Grade Acetone is used for removing all moisture in the grouting equipment.

  • AV-219 Fibrotite (Oakum)

    AV-219 Fibrotite - also known as Oakum - is a strong fibrous jute material free of oils and tars used in various cracks or joints in concrete and is designed for use in areas where a carrier is needed to keep grout in place.

  • Resin Injection Gun

    Use with single-component pumping systems. Stainless steel gauge attached to the gun reads pressures while injecting into the crack.