AV-248-LV Flexseal LV

AV-248-LV Flexseal LV

AV-248-LV Flexseal LV is a low viscosity, moisture activated, MDI-based polyurethane resin whose reaction is catalyzed by mixing AV-249-LV Flexseal Cat LV with AV-248-LV. Injected as a single component, AV-248-LV is designed to seal active and potential water leaks in various cracks and annular space where flexibility is needed but is susceptible to wet/dry cycles. AV-248-LV cures resilient, impermeable, and flexible.

AV-249-LV Flexseal Cat LV is the catalyst designed exclusively for AV-248-LV Flexseal LV. Typically, one container of AV-249-LV  is used per 5-gallon container of AV-248-LV. Depending on the desired reaction time, AV-249-LV may be doubled.

AV-248-LV Flexseal LV is tested and certified for NSF/ANSI/CAN 61 - Drinking Water System Components.

Technical Resources


Additional Resources


Related Products

  • AV-208 Technical Grade Acetone

    AV-208 Technical Grade Acetone is used for removing all moisture in the grouting equipment.

  • AV-219 Fibrotite (Oakum)

    AV-219 Fibrotite - also known as Oakum - is a strong fibrous jute material free of oils and tars used in various cracks or joints in concrete and is designed for use in areas where a carrier is needed to keep grout in place.

  • Resin Injection Gun

    Use with single-component pumping systems. Stainless steel gauge attached to the gun reads pressures while injecting into the crack.