Skip to main content

AV-290 Fast-Set

AV-290 Fast-Set

AV-290 Fast-Set is a mid-range viscosity, dual component, hydrophobic MDI-based polyurethane resin designed to rapidly fill large voids on the exterior of below grade structures where high water flow is present. Expanding between 1,500% and 2,000%, the fast-setting resin cures to form a rigid, impermeable closed-cell foam that can withstand wet/dry cycles. AV-290 does not require any water to react.

APPLICATIONS
• Fill large voids below-grade
• Stops high volume leaks

Technical Resources

Technical Data Sheet: AV-290 Fast-Set TDS.pdf
Safety Data Sheet: AV-290 Fast-Set Part A SDS.pdf
Safety Data Sheet: AV-290 Fast-Set Part B SDS.pdf

Additional Resources

Videos & Animations

Case Studies & Literature

Related Products

  • AV-208 Technical Grade Acetone

    AV-208 Technical Grade Acetone is used for removing all moisture in the grouting equipment.

  • AV-219 Fibrotite (Oakum)

    AV-219 Fibrotite - also known as Oakum - is a strong fibrous jute material free of oils/tars used in
    cracks or joints in areas a carrier is needed to keep grout in place. 

  • Resin Injection Gun

    The Resin Injection Gun is used with single-component pumping systems. The stainless-steel gauge attached to the gun reads pressures while injecting into the crack. The tip is fitted with a grease fitting coupler.

  • Dual Component Cartridge Gun - 300 ml

    535-XSP Dual Component Cartridge Gun