Skip to main content

AV-248-LV Flexseal LV

AV-248-LV Flexseal LV

AV-248-LV Flexseal LV is a low viscosity, moisture activated, MDI-based polyurethane resin whose reaction is catalyzed by mixing AV-249-LV Flexseal Cat LV with AV-248-LV. Injected as a single component, AV-248-LV is designed to seal active and potential water leaks in various cracks and annular space where flexibility is needed but is susceptible to wet/dry cycles. AV-248-LV cures resilient, impermeable, and flexible.

AV-249-LV Flexseal Cat LV is the catalyst designed exclusively for AV-248-LV Flexseal LV. Typically, one container of AV-249-LV  is used per pail of AV-248-LV. Depending on the desired reaction time, AV-249-LV may be doubled.

APPLICATIONS
• Fine cracks above or below grade in humid or arid atmospheres
• Fills various voids and pipe penetrations
• Stops leaks in concrete structures
• Designed for tunnels, mines, dams, reservoirs, block walls, and structures that may shift 

AV-248-LV Flexseal LV is tested and certified for NSF/ANSI/CAN 61 - Drinking Water System Components.

Technical Resources

Technical Data Sheet: AV-248-LV Flexseal LV TDS.pdf
Safety Data Sheet: AV-248-LV Flexseal LV SDS.pdf
Safety Data Sheet: AV-249-LV Flexseal Cat LV SDS.pdf
Potable Water Certificate

Additional Resources

Videos & Animations

Case Studies & Literature

Related Products

  • AV-208 Technical Grade Acetone

    AV-208 Technical Grade Acetone is used for removing all moisture in the grouting equipment.

  • AV-219 Fibrotite (Oakum)

    AV-219 Fibrotite - also known as Oakum - is a strong fibrous jute material free of oils/tars used in
    cracks or joints in areas a carrier is needed to keep grout in place. 

  • Resin Injection Gun

    The Resin Injection Gun is used with single-component pumping systems. The stainless-steel gauge attached to the gun reads pressures while injecting into the crack. The tip is fitted with a grease fitting coupler.