Skip to main content

AV-248 Flexseal

AV-248 Flexseal

AV-248 Flexseal is a moisture activated, MDI-based polyurethane resin whose chemical reaction is catalyzed by mixing AV-249 Flexseal AC with AV-248. Injected as a single component, AV-248 is designed to seal active and potential water leaks in various cracks and annular space where flexibility is needed, but is susceptible to wet/dry cycles. AV-248 cures resilient, impermeable, and flexible.

AV-249 Flexseal AC is the catalyst designed exclusively for use with AV-248 Flexseal. Typically, one container of AV-249  is used per pail of AV-248. Depending on the desired reaction time, AV-249 may be doubled. 

• For use above or below grade in humid or arid atmospheres
• Fills various cracks and pipe penetrations
• Stops leaks in concrete structures
• Designed for tunnels, mines, dams, reservoirs, block walls and structures that may shift

Technical Resources

Additional Resources

Related Products

  • AV-208 Technical Grade Acetone

    AV-208 Technical Grade Acetone is used for removing all moisture in the grouting equipment.

  • AV-219 Fibrotite (Oakum)

    AV-219 Fibrotite - also known as Oakum - is a strong fibrous jute material free of oils/tars used in
    cracks or joints in areas a carrier is needed to keep grout in place. 

  • Resin Injection Gun

    The Resin Injection Gun is used with single-component pumping systems. The stainless-steel gauge attached to the gun reads pressures while injecting into the crack. The tip is fitted with a grease fitting coupler.