Skip to main content

AV-202-NTP Multigrout NTP

AV-202-NTP Multigrout NTP

AV-202-NTP Multigrout NTP is a single component, moisture activated MDI/TDI blended polyurethane injection resin. Designed for sealing active water leaks in large cracks or joints in concrete structures, it can absorb up to 12 times its weight in water creating a tough, impermeable foam or gel with superb adhesive qualities.

APPLICATIONS
• Large cracks or joints in concrete, or used in conjunction with AV215 Resin Rod™ or AV-219 Fibrotite™ (oakum) systems
• Designed for applications where high-volume water flow is an active or potential problem and a high viscosity chemistry is required
• Used successfully in manhole sealing and pipe penetrations
• Excellent choice for moving cracks and joints 

AV-202-NTP is equivalent to AV-202 Multigrout, however NOT certified for use in potable water.

Technical Resources

Technical Data Sheet: AV-202 NTP Multigrout NTP TDS.pdf
Safety Data Sheet: AV-202-NTP Multigrout NTP SDS.pdf

Additional Resources

Videos & Animations

Related Products

  • AV-202-LV Multigrout LV

    AV-202-LV Multigrout LV is the low viscosity version of the original AV-202 Multigrout - a single component, moisture activated MDI/TDI blended polyurethane injection resin.

  • AV-208 Technical Grade Acetone

    AV-208 Technical Grade Acetone is used for removing all moisture in the grouting equipment.

  • AV-215 Resin Rod

    Open cell foam rod designed for use with polyurethane foam grouts...

  • AV-219 Fibrotite (Oakum)

    AV-219 Fibrotite - also known as Oakum - is a strong fibrous jute material free of oils/tars used in
    cracks or joints in areas a carrier is needed to keep grout in place. 

  • AV-202® Multigrout

    AV-202® Multigrout is a single component, moisture activated MDI/TDI blended polyurethane injection resin. AV-202 is certified for use in potable water.

  • Resin Injection Gun

    The Resin Injection Gun is used with single-component pumping systems. The stainless-steel gauge attached to the gun reads pressures while injecting into the crack. The tip is fitted with a grease fitting coupler.